Ask a question

Your name:
E-mail:
Phone:
Message:
×

Galileosky GPS Lite v1.8.5

 

GALILEOSKY GPS Lite on-board equipment is a light version of GALILEO GPS device major version.

The main purpose of GALILEOSKY GPS Lite GPS-terminal is monitoring vehicle traffic. Besides there is a possibility to connect up to 2 analog / digital / pulse-frequency sensors and control one external actuator.

The main function of the device

  • Control of all vehicle traffic;
  • Detailed vehicle track drawing with no breaks even in case of communication interruption.

Additional functions

  • Two full-function analog / digital / frequency / pulse inputs (there is also a possibility to install an alarm button);
  • One transistor output (output type "open collector");
  • Built-in accelerometer for false coordinates filtering;
  • Built-in thermometer for device inside temperature diagnostics.

Characteristics

Number of digital outputs 2
Number of analog inputs 2
Number of digital outputs 1
1-wire bus no
RS-485 bus no
RS-232 bus no
CAN (FMS) bus no
Connection of an external Glonass receiver no
Stand-by battery charging circuit no
Voice communication with the driver / loud speaker communication no
Security functions no
Voice messages about state of satellite vehicle monitoring system no
Built-in impact / tilt sensors (only for filtering of false coordinates) yes
Built-in temperature sensor yes
Remote mounted temperature sensor no
Control and setting via SMS yes
Remote updating of firmware via GPRS (Firmware) yes
Control via GPRS (Internet) yes
Auxiliary mobile network operator (possibility to switch to it in roaming) no
GPS-chip set MTK
Data transfer channel GSM / GPRS / SMS
Aerial type (GLONASS, GSM) external
Interface for communication with PC USB 2.0
Voice interface (GSM) no
Internal nonvolatile memory flash up to 58,000 pixels
microSD card no
External battery charging circuit no
Supply voltage from 10 to 30 V

Opportunities

The main purpose of GALILEOSKY GPS Lite GPS-terminal is monitoring vehicle traffic. Besides there is a possibility to connect up to 2 analog / digital / pulse-frequency sensors and control one external actuator.

Information transmitted by the terminal

  • Vehicle coordinates: latitude, longitude, altitude;
  • Vehicle speed and driving direction;
  • Violations (overspeeding);
  • Level of vibration in the vehicle;
  • Monitoring of fuel consumption;
  • Exact Greenwich time and date;
  • Temperature inside the device;
  • Status of inputs (buttons), analog sensors;
  • Status of digital outputs.

Target purpose of the device

  • Vehicle motion monitoring;
  • Monitoring of vehicle operation;
  • Detection of drains and refills (only analogue sensors).
  • Control of all vehicle traffic;
  • Detailed vehicle track drawing with no breaks even in case of communication interruption.

Additional functions

  • Two full-function analog / digital / frequency / pulse inputs (there is also a possibility to install an alarm button);
  • One transistor output (output type "open collector");
  • Built-in accelerometer for false coordinates filtering;
  • Built-in thermometer for device inside temperature diagnostics.

Certificates

 
Certificate of conformity GOST_R for Galileo-GLONASS products OKP code 68 1100

 

`]]